Data Center Solutions

Decades of Experience

LU-VE cooling technology enables the growth of data centers, driven by AI, cloud computing, cryptocurrencies mining, IoT and online communities.

Our energy-efficient and water-saving designs deliver top-tier performance while keeping energy costs in check, all while ensuring sustainability for future generations.

Focused on innovation and rapid market delivery, we provide efficient, responsible solutions that meet the evolving needs of our customers and our planet.

Products

Dry Coolers

Adiabatic Coolers

Internal Server Cooling Solutions

Technologies

Oval Tubes

It is an exclusive LU-VE Group: all our standard Liquid Cooler are equipped with Oval tubes Heat
Exchangers which enables enhanced performances Up to 15% compared with round tubes geometries.

Up to 40% reduced air pressure drops, which leads to up to 15% increased coil efficiency (using same fans), and reduced motor power consumption, or reduced size of units (using smaller fans, or less fans).

Control Panels

Features such as:

  • PLC Based controller

  • Touch screen

  • Floating activation set point adjusted to running conditions

  • Delta temperature control

  • Anti condensation protection by controlling external 3-way valve

  • Optimized fan control 7-Zone for process cooling

  • 3-way valve control: 0-10 V , 2-10 V or 4-2 mA

  • Feedback signal 3-way valve

Whisper Plus

The sound of silence Whisperer Plus® is the second generation of silencer specifically designed for Liquid coolers, Condensers and CO2 Gas coolers:

  • sound level reduction: Up to -6 dB(A)

  • reduction of electricity consumption - up to 19%

Benefits:

  • Energy saving

  • Extremely quiet operation

  • Smaller unit footprint

  • Elimination of warm air recirculation

Protective coatings

PRE-PAINTED HYDROPHILIC COATING

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

PAINTED HYDROPHILIC COATING. HYDRAFIN

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

SINGLE LAYER PRE-PAINTED HYDROPHOBIC COATING

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

PRE-PAINTED HYDROPHOBIC Coating (Double Coat)

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

ALUPLUS

  • Aluminium-Magnesium alloy is coated with a special paint treatment for enhanced protection and corrosion resistance.

  • The ALUPLUS fin is made from an Aluminium-Magnesium alloy.

  • Extensive salt spray tests were conducted to analyze corrosion resistance in detail.

  • Results showed that the ALUPLUS fin is 86% more resistant than the previous ALUPAINT solution.

ALUMINIUM-MAGNESIUM 2.5

  • High Corrosion Resistance – Ideal for marine, HVAC, and industrial use.

  • Efficient Heat Transfer – Optimized thermal conductivity for superior performance

  • Light and Strong – Combines durability with a lightweight design.

THERMOGUARD

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

BLYGOLD

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

HERESITE

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

ELECTROFIN

  • The ” hydrophilic ” coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°).

  • Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.

  • Corrosion resistance: 250 hours (ASTM B117)

Get in touch.

Ready to optimize your data center cooling with high-performance equipment? We're here to help.

Whether you’re designing a new facility, upgrading existing infrastructure, or just exploring your options, our team of HVAC engineers is ready to support you every step of the way. With deep industry knowledge and trusted manufacturer partnerships, we’ll help you find the right cooling solution tailored to your specific